How To

Install a Splayed Light Shaft

Products You'll Need Products You'll Need

  • Velux Skylights
  • 70x45mm Framing Timbers

Tools You'll Need Tools You'll Need

  • Circular Saw
  • Drop Saw
  • Nail Gun
  • Tape Measure
  • Pencil
  • 1200mm Level
  • Personal Protective Equipment

 

Adding Velux Skylights with a splayed light shaft capitalises on natural light and can be incorporated into any existing roofline, renovation or new build.  In the Long Jetty Reno, we designed the void to be directly over the kitchen.  A splayed light shaft does create a beautiful architectural feature, but is also a really practical solution for adding natural light and ventilation to your home.  

Step 1

Install Velux Skylights

Once the Velux Skylights have been installed from the exterior, it's time to come inside to frame up the void to create an architectural feature and capitalise on all that natural light.

Step 2

Framing up the Light Shaft

The gyprock will tuck behind the rebate in the skylight - this is your starting point for the frame on the bottom and the sides of the light shaft.  Use a spirit level to ensure you're plumb when setting out the frame.

Step 3

Establish a Starting Point for the Splay

Locate the back end of the rebate for your starting point and make sure your angle flows from there, raking from this point and down towards the ceiling height.

Creating a splay instantly makes the light shaft feel more open and creates an architectural feature

Step 4

Gyprock and Finish Off!

The gyprockers will be able to install the sheets, set the plaster, and sand - ready for you to paint!

To watch the video, go here.